Big Bend GMD5 Logo

Home | Board of Directors | District Map | GMD Act | Rules & Regulations | GMD5 By-Laws | GMD5 Forms | Newsletter | Upcoming Events | Weather Stations | Water Levels | Cathodic Borehole Program | Flowmeter Requirements | Central Kansas Water Banking Association | Rattlesnake Creek Management Plan | Links | Contact Us

 

Cathodic Protection Borehole Program

(see FAQ's)

GROUNDWATER PROTECTION NOTICE

DRILLING PERMITS FOR CATHODIC PROTECTION BOREHOLES

Pursuant to the Cathodic Protection Regulations effective May 14, 2004, an approved drilling permit must be obtained from the Big Bend Groundwater Management District No. 5 BEFORE a cathodic protection borehole is drilled and constructed. While reviewing the cathodic protection rules and regulations prior to application, pay special attention, as Big Bend GMD #5 has District specific rules and regulations. For example, the District requires a surface casing to have a standard dimension ration (SDR) of 21 or less, whereas KCC requires an SDR of 26 or less.

WHO MUST FILE FORM CP-10 OR CP-15 FOR DRILLING PERMIT
Any person planning to drill and construct a cathodic protection borehole that will penetrate the water table of an aquifer within the boundaries of the Big Bend Groundwater Management District No. 5 must file either form
CP-10 (cased borehole) or CP-15 (uncased borehole) (Application for Permit to Drill and Construct a Cathodic Protection Borehole.) Please refer to the location map on this page for District boundaries.
Contact the Big Bend Groundwater Management District No. 5 for an applicants information kit, or print appropriate forms from this website. Filing fee is not required.

WHEN TO FILE FORM CP-10 OR CP-15 FOR DRILLING PERMIT
A completed Form CP-10 or CP-15 and attachments must be filed a minimum of 60 days prior to planned construction.

WHAT TO FILE
For EACH cathodic protection borehole you must file:

A completed Form CP-10 or CP-15
A construction plan that illustrates the information contained in Form CP-10 or CP-15
A copy of the KCC application for surface pit permit (CDP-1), when applicable
A cathodic well completion form (AC-01), District As-Built Plan, and WWC5 (upon completion of borehole)

DRILLING PERMIT
Approval of Form CP-10 or CP-15, drilling and construction permit application, constitutes compliance with Cathodic Protection Borehole Rules and Regulations.

WAIVER
The applicant may request an exception to these regulations pursuant to K.A.R. 82-3-100(b)

Cathodic Protection Borehole Forms:

Cased Boreholes:

Uncased Boreholes:

Completion Forms:

Form CP-10 (editable)New Form

Form CP-15 (editable)New Form

KCC Well Completion Form (AC-01)

Form CP-10 (pdf)

Form CP-15 (pdf)

District As-Built Plan

Construction Plan

Construction Plan

KDHE WWC5 Form

KCC Application for Surface Pit (CDP-1)

KCC Application for Surface Pit (CDP-1)

District Map

Adobe.com

125 S Main St.
Stafford, KS 67578
Phone: (620) 234-5352

Webpage maintained by Orrin Feril & Juan Uribe

Page last updated: 07/27/2010 04:43 PM

Valid HTML 4.01 Transitional